Radiation-proof lead door, through the name can be understood, this is a door that can be prevented from radiation, the radiation-proof door is divided into manual door and electric door, the electric door is equipped with a motor, remote control, controller and other accessories of the electric door, can be controlled by wireless remote control door close and open.
The hospital operating room also requires radiation protection at the same time, but also requires the airtightness of the door, so it is derived from the airtight door, on the basis of the ordinary door, the edge of the door is installed with an airtight strip.
In addition, the appearance of the radiation-proof lead door, the finished product of the radiation-proof lead door, the door panel is stainless steel, and some are colored after spraying.
Next, let's talk about the radiation protection principle of the radiation protection lead door:
Radiation-proof lead gate is used to reduce the radiation of the lead plate, due to the high density of the radiation-proof lead plate, so that the gap between the lead plate particles is very small, less than the length of the ultraviolet spectrum, that is, less than the spectral length of the radiation generated, so that the radiation wave can not pass through the lead plate for a long time, so it can isolate the radiation.
The characteristics of lead plate: it has strong anti-corrosion, acid and alkali resistance, acid environment construction, medical anti-radiation, X-ray, CT room ray protection, weighting, sound insulation and many other aspects, and it is a relatively cheap radiation protection material.
Technical features of radiation-proof lead doors:
1. The surface is made of hot-melt galvanized steel sheet or stainless steel, which is not easy to rust. The inner reinforcement of the door is made of t1.6 hot-melt galvanized steel sheet, which has high strength and is not easy to deform.
2. High-quality door frame sealing structure and sealing materials ensure excellent sound insulation and shock absorption.
3. High-pressure electrostatic powder spraying or stainless steel finish to meet the needs of different colors.
4. On the basis of meeting the protective function, it can achieve antistatic, antibacterial, and long-lasting preservation.
5. The door frame and the door leaf split, using heavy-duty stainless steel hinge connection, easy to install the door frame and door leaf separately, and easy maintenance, hinge can be opened more than 200,000 times.
6. Flexible opening, large span, light weight, no noise, convenient operation, smooth operation, not easy to damage and other characteristics.
7. The gate control is programmable controller and frequency conversion circuit, which can be designed according to the special requirements of customer use. With a multi-function selector switch, the operating status of the electric door can be controlled at will.On the way to open the door leaf, if it encounters an obstacle, it will stop, the door leaf will be closed on the way, and if it encounters an obstacle, it will be opened in the direction to prevent the occurrence of unexpected conditions, and the power can be manually opened.
Post time: Sep-01-2022
.png)
